ES-3148 User's Guide
Figure 55 Link Aggregation: Configuration
The following table describes the labels in this screen.
Table 36 Link Aggregation Control Protocol: Configuration
LABEL
Link Aggregation Control Protocol
Active
System
Priority
128
DESCRIPTION
Select this checkbox to enable Link Aggregation Control Protocol (LACP).
LACP system priority is a number between 1 and 65,535. The switch with the lowest
system priority (and lowest port number if system priority is the same) becomes the
LACP "server". The LACP "server" controls the operation of LACP setup. Enter a
number to set the priority of an active port using Link Aggregate Control Protocol
(LACP). The smaller the number, the higher the priority level.
Chapter 15 Link Aggregation