National Instruments DAQPad-6020E User Manual page 179

NI 6030E/6031E/6032E/6033E Family
© National Instruments Corporation
For a detailed description of each signal, refer to the
Descriptions section of Chapter 1,
The NI 6030E/6031E/6032E/6033E are Plug-and-Play, multifunction AI,
AO, DIO, and TIO devices for PCI bus computers.
The NI 6030E features the following:
• 16 AI channels (eight differential) with 16-bit resolution
• Two AO channels with 16-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 68-pin I/O connector
The NI 6031E features the following:
• 64 AI channels (32 differential) with 16-bit resolution
• Two AO channels with 16-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 100-pin extended AI connector
The NI 6032E features the following:
• 16 AI channels (eight differential) with 16-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 68-pin I/O connector
The NI 6033E features the following:
• 64 AI channels (32 differential) with 16-bit resolution
• Eight lines of TTL-compatible DIO
• Two 24-bit counter/timers for TIO
• A 100-pin extended AI connector
Because the NI 6030E/6031E/6032E/6033E devices have no DIP switches,
jumpers, or potentiometers, you can easily configure and calibrate them
through software.
Appendix A
DAQ System
A-43
Device-Specific Information
I/O Connector Signal
Overview.
E Series User Manual