Page 2
Rotary hammer Article number Technical file at: 1770 RH1*1770** 2006/42/EC EN 62841-1:2015 EN 62841-2-6:2020 + A11:2020 2014/30/EU 2011/65/EU EN 55014-1:2021 EN 55014-2:2021 EN 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019 EN 63000: 2018 * Skil BV Rithmeesterpark 22 A1 4838 GZ Breda The Netherlands 21.10.2021...
Page 3
Chervon Europe Ltd., 34 Bridge Street, Reading, RG1 2LU, United Kingdom, as authorized representative (in terms of above regulations) acting on behalf of Skil BV, Rithmeesterpark 22 A1, 4838GZ Breda, The Netherlands James McCrory Technical Service Manager Place of issue: Reading...
There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Rotary hammer 1770 Water entering a power tool will increase the risk of electric shock. INTRODUCTION d) Do not abuse the cord.
Page 12
ACCESSORIES changing accessories, or storing power tools. Such • SKIL can assure flawless functioning of the tool only preventive safety measures reduce the risk of starting the when original accessories are used power tool accidentally.
If the tool should fail despite the care taken in - select “rotating” chiseling mode manufacturing and testing procedures, repair should - place chisel in desired position be carried out by an after-sales service centre for SKIL - select “fixed” chiseling mode power tools •...
compatible recycling facility - symbol 4 will remind you of this when the need for disposing occurs NOISE / VIBRATION • Measured in accordance with EN 62841 the sound pressure level of this tool is 92.0 dB(A) and the sound power level 103.0 dB(A) (uncertainty K = 3 dB), and the vibration ✱...