Page 2
Rotary hammer Article number Technical file at: 1781 RH1*1781** 2006/42/EC EN 62841-1:2015 EN 62841-2-6:2020 + A11:2020 2014/30/EU 2011/65/EU EN 55014-1:2021 EN 55014-2:2021 EN 61000-3-2:2019+A1:2021 EN 61000-3-3:2013+A1:2019 EN 63000:2018 * Skil BV Rithmeesterpark 22 A1 4838 GZ Breda The Netherlands 21.10.2022...
Page 3
Chervon Europe Ltd., 34 Bridge Street, Reading, RG1 2LU, United Kingdom, as authorized representative (in terms of above regulations) acting on behalf of Skil BV, Rithmeesterpark 22 A1, 4838GZ Breda, The Netherlands James McCrory Technical Service Manager Place of issue: Reading...
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of Rotary hammer 1781 electric shock. d) Do not abuse the cord. Never use the cord for INTRODUCTION carrying, pulling or unplugging the power tool.
Page 10
ACCESSORIES changing accessories, or storing power tools. Such • SKIL can assure flawless functioning of the tool only preventive safety measures reduce the risk of starting the when original accessories are used power tool accidentally.
Page 11
- it takes a short time for the hammer mechanism to manufacturing and testing procedures, repair should reach full impact power be carried out by an after-sales service centre for SKIL - do not apply too much pressure on the tool; let the tool power tools...
Page 12
accordance with a standardised test given in EN 62841; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned - using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level - the times when the tool is switched off or when it is...