12.21
Removing the seat
12.22
Mounting the seat
Info
The heim joint for the shock absorber on the link fork
is Teflon coated. It must not be lubricated with grease,
nor with any other lubricants. Lubricants dissolve the
Teflon coating, thereby drastically reducing the service
life.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Remove screw
S03480-10
–
Raise the rear of the seat, pull the seat back, and lift it off.
H02218-10
–
Mount the front of the seat on the collar bushings of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure the seat is locked in correctly.
H02218-11
SERVICE WORK ON THE CHASSIS 12
1
on the left side.
p. 63)
77