(Exc-F Eu, Xcf-W) - KTM 450 EXC-F 2023 Owner's Manual

12.9 Removing the lower triple clamp
–
Position the brake caliper, and mount and tighten screws
Guideline
Screw, front
brake caliper
–
Mount the cable tie.
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
K00546-10
Finishing work
–
Install the front wheel.
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
(EXC‑F EU, XCF‑W)
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
Loosen screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and hang
them to the side.
Info
V01785-10
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01757-10
SERVICE WORK ON THE CHASSIS 12
M8 25 Nm (18.4 lbf ft)
5
.
( p. 114)
p. 127)
( p. 113)
( p. 65)
p. 74)
1
.
2
.
3 4
and protective ring .
4
.
Loctite ® 243™
p. 126)
p. 125)
p. 63)
67