Table of Contents
Advertisement
11 TUNING THE CHASSIS
11.15
11.16
60
Handlebar position
M00993-10
M00987-10
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
–
Change the handlebar if the handlebar is damaged or bent.
(EXC‑F EU, XCF‑W)
On the upper triple clamp, there are 2 holes at a distance
A
of
to each other.
15 mm (0.59 in)
A
Hole distance
The holes on the handlebar supports are placed at a distance
B
of
from the center.
3.5 mm (0.138 in)
B
Hole distance
The handlebar holders can be mounted in four different posi-
tions.
(EXC‑F SIX DAYS EU)
On the upper triple clamp, there are 2 holes at a distance
A
of
to each other.
15 mm (0.59 in)
A
Hole distance
The holes on the handlebar supports are placed at a distance
B
of
from the center.
3.5 mm (0.138 in)
B
Hole distance
The handlebar holders can be mounted in four different posi-
tions.
Advertisement
Table of Contents
