12.39
Checking the chain, rear sprocket, engine sprocket, and chain guide
Preparatory work
–
Raise the motorcycle with the lift stand. (
Main work
–
Shift the transmission into neutral.
–
Check the rear sprocket and engine sprocket for wear.
»
If the rear sprocket and engine sprocket are worn:
–
Change the drivetrain kit.
400227-01
–
Pull on the top section of the chain with the specified
A
weight
.
Guideline
Weight of chain wear mea-
surement
–
Measure distance
section.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
Maximum distance
18 chain rollers at the
longest chain section
»
If distance
–
Change the drivetrain kit.
400987-10
SERVICE WORK ON THE CHASSIS 12
Info
The engine sprocket, rear sprocket and chain
should always be replaced together.
10 ... 15 kg (22 ... 33 lb.)
B
of 18 chain rollers in the lower chain
272 mm (10.71 in)
B
from
B
is greater than the specified measurement:
Info
When a new chain is mounted, the rear sprocket
and engine sprocket should also be changed.
New chains wear out faster on old, worn sprock-
ets.
p. 63)
91