Table of Contents
Advertisement
FM Operation
Switching from DAB to FM Mode
Press the DAB/FM button repeatedly to switch to FM mode. The display will show FM
frequency.
On the top line of the display is the current frequency. On the bottom of the display,
<Programme Type> will show since no channel is tuned in and no RDS (Radio Data System)
data are available.
Auto Scan
To search for an FM station, press and then release the AUTO button. This will start scanning
up the frequency band. To scan down the frequency band, press and hold the AUTO
button. Once a station has been found, the scanning will stop automatically.
If no station is found, then the tuning will stop once it has cycled through the entire FM
band (87.5-108MHz).
Manual Scan
To search for FM stations manually, simply press the PREV or NEXT buttons repeatedly until
your desired frequency is reached.
Presetting Stations
You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily. The display will then show "Preset Save #".
1. To programme a preset station, you must first be listening to the station that you would
like to save, then press and hold the PRESETS button.
2. Press the PREV or NEXT buttons to select your desired preset station number.
3. Press the SELECT button to confirm the selection.
4. The station will be stored and the display will then show "Saved".
Recalling a Preset Station
1. Once you have saved a station to one of the preset stations, you can recall it by pressing
the PRESETS button. The display will then show "Preset Load #".
2. Press the PREV or NEXT buttons to select your desired preset station number.
3. Press the SELECT button to confirm the selection.
Audio Mode
Press the SELECT button to toggle between the Auto or Mono audio mode.
•
The unit will automatically switch between stereo and mono mode, when auto mode is
selected but you can override this and switch this function manually by changing it to
mono mode. This is helpful when receiving poor signal reception.
•
During stereo reception, the received L/R stereo sound will be automatically combined
into one single channel to suit the single speaker design of this radio.
11
Advertisement
Table of Contents
