Fm Operation; Auto Scan; Manual Tune; Scan Setting - Logik L5DAB13E Instruction Manual

GB

FM Operation

Press MODE repeatedly to select FM radio. The unit will automatically perform auto scan
function. Once a

Auto Scan

While listening to an FM station, press SNOOZE / SCROLL / SELECT to perform auto scan. Once
a station has been found, the scanning will stop automatically.

Manual Tune

To tune FM frequency manually, turn SNOOZE / SCROLL / SELECT until your desired frequency
is reached.
With FM radio it may be necessary to fine tune each station by turning SNOOZE /
SCROLL / SELECT. Each turn will adjust the frequency by 0.05MHz. If reception is still
poor, adjust the position of the FM aerial or try moving the radio to another location.

Scan Setting

In FM mode, press MENU.
1.
Turn SNOOZE / SCROLL / SELECT to select Scan setting then press to confirm.
2.
3. Turn SNOOZE / SCROLL / SELECT to select YES to receive strong station only or No then
press to confirm.

Audio Setting

In FM mode, press MENU.
1.
Turn SNOOZE / SCROLL / SELECT to select Audio Setting then press to confirm.
2.
3. Turn SNOOZE / SCROLL / SELECT to select YES to listen to mono only, or NO to let the unit
select Stereo or Mono automatically.
4. Press SNOOZE / SCROLL / SELECT to confirm.

Presetting Stations

You can store up to 10 of your favourite stations to the memory. This will enable you to access
your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you
would like to save.
2. Press and hold PRESET. "Save to Preset" menu will show on the
display.
SNOOZE / SCROLL / SELECT to select a preset number then press to confirm
3. Turn
4. The station will be stored and the station name will show on the display.
20
station has been found, will stop automatically.
the scanning
.