Table of Contents
Advertisement
FM Operation
Switching from DAB to FM Mode
To switch the unit from DAB to FM mode, press the DAB/FM button once. The display
shows "Switching to FM".
On the top line of the display is the current frequency. On the bottom of the display,
<Programme Type> will show since no channel is tuned in and no RDS (radio data
system) data is available.
Auto Scan
To search for an FM station, you need to press and the SCAN button. The unit will
start scanning up the frequency band. To scan down the frequency band, press
and hold the SCAN button. Once a station has been found, the scanning will stop
automatically.
If no station is found, then the tuning will stop once it has cycled through the entire
FM band (87.5-108MHz).
Manual Scan
To search FM stations manually, simply press the PREV / NEXT buttons repeatedly
until your desired frequency is reached. Each press will skip 0.05MHz
Presetting Stations
You can store up to 10 of your favourite stations to the memory. This will enable you to
access your favourite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you would like to
save, then press and hold the PRESET button.
2. Press the PREV / NEXT buttons to select your desired preset station number.
3. Press the SELECT button to confirm the selection.
4. The station will be stored and the display will show "Preset # stored".
Recalling a Preset Station
1. Once you have saved a station to one of the preset buttons, you can recall it by
pressing the PRESET button.
2. Press the PREV / NEXT buttons to select your desired preset station number.
3. Press the SELECT button to confirm the selection.
4. If you choose a preset that hasn't been allocated a station, the display will show
"Preset empty #".
GB-12
Advertisement
Table of Contents
