Fm Operation; Switching From Dab To Fm Mode; Auto Scan; Manual Scan - Logik LRDABB17 Instruction Manual

FM Operation

Switching from DAB to FM Mode

Press the MODE Button to switch to FM mode. The display will show FM frequency.

Auto Scan

Ensure that you fully extend the aerial vertically before starting the auto scan. To search for
an FM station, press the TUNE button, and the display will show Tuning. Press –VOLUME+/
SELECT dial to confirm. The display will show Scanning... Once a station has been found,
the scanning will stop automatically.

Manual Scan

To search for FM stations manually, press the TUNE button. The display will show Tuning.
Turn the –VOLUME+/SELECT dial until your desired frequency is reached.

Scan Setting

You can set your radio to tune in just the strongest stations or all stations.
1. In ON mode, press and hold the MENU/INFO button, then turn the –VOLUME+/SELECT
dial to select Scan setting, then press the –VOLUME+/SELECT dial to confirm.
2. Turn the –VOLUME+/SELECT dial to toggle between Strong stations only or All
stations.
3. Press the –VOLUME+/SELECT dial to confirm.

Audio Setting

• The unit will automatically switch between stereo and mono mode, but you can
override this and switch this function manually. This is helpful when receiving
poor signal reception.
• The received L/R stereo sound will be automatically combined into one single
channel to suit the single speaker design of the unit.
1. Press and hold the MENU/INFO button, then turn the –VOLUME+/SELECT dial to select
Audio setting, then press the –VOLUME+/SELECT dial to confirm.
2. Turn the –VOLUME+/SELECT dial to toggle between Stereo allowed and Forced
mono.
3. Press the –VOLUME+/SELECT dial to confirm.
16