Fm Operation; Switching From Dab To Fm Mode; Auto Scan; Manual Scan - Logik LHDAB17 Instruction Manual

FM Operation

Switching from DAB to FM Mode

To switch the unit from DAB to FM mode, press MODE once.

Auto Scan

To search for an FM station, press
and hold to start the forward or reverse scanning. "Scanning..." will
show on the display. Once a station has been found, the scanning will stop
automatically.

Manual Scan

To search for FM stations manually, press
frequency is reached.
With FM radio, it may be necessary to fine tune each station by
pressing
0.05 MHz. If reception is still poor, adjust the position of the aerial
or try moving the radio to another location.

Scan Setting

This is a scanning option to scan all stations, or just scan stations with
strong signal.
1. Press and hold INFO/MENU and then press
setting>. Press ENTER to confirm.
to select <All stations> or <Strong stations only>. Press
2. Press
ENTER to confirm.
repeatedly. Each press will adjust the frequency by
and then press SCAN button, or press
repeatedly until your desired
to select <Scan
19