Removing The 4-Cell Battery; Installing The 4-Cell Battery - Dell Precision 3561 X2CND Service Manual

● If the battery gets stuck inside your computer as a result of swelling, do not try to release it as puncturing,
bending, or crushing a lithium-ion battery can be dangerous. In such an instance, contact Dell technical
support for assistance. See www.dell.com/contactdell.
● Always purchase genuine batteries from
● Swollen batteries should not be used and should be replaced and disposed properly. For guidelines on how to
handle and replace swollen Lithium-ion batteries, see

Removing the 4-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the SIM card.
3. Remove the microSD
4. Remove the base cover.
About this task
The following image indicates the location of the 4-cell (64 Wh) battery and provides a visual representation of the removal
procedure.
Steps
1. Disconnect the battery cable from the connector system board.
2. Remove the three (M2x4) screws that secure the 4-cell battery to the palm-rest and keyboard assembly.
3. Lift the 4-cell battery, along with its cable, off the palm-rest and keyboard assembly.

Installing the 4-cell battery

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
40 Removing and installing components
Before working inside your
card.
www.dell.com or authorized Dell partners and resellers.
Handling swollen Lithium-ion
computer.
batteries.