Table of Contents
Advertisement
Next steps
1. Install the
microSD
card.
2. Install the
SIM
card.
3. Install the
base
cover.
4. Follow the procedure in
Removing the heat sink and fan assembly - Discrete configuration
Prerequisites
1. Follow the procedure in
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The
oils in your skin can reduce the heat transfer capability of the thermal grease.
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch it.
2. Remove the
SIM
card.
3. Remove the
microSD
4. Remove the
base
cover.
About this task
The following images indicate the location of the heat sink and fan assembly for a system with discrete configuration and
provide a visual representation of the removal procedure.
Steps
1. Remove the two (M2x4) screws that secure the system fan to the frame.
2. In reverse sequential order (as indicated on the heat sink), loosen the six (M2x3) screws that secure the heat sink and fan
assembly to the system board.
3. Disconnect the fan cable from the connector on the system board.
4. Lift the heat sink and fan assembly off the system board.
50
Removing and installing components
After working inside your
Before working inside your
card.
computer.
computer.
Advertisement
Table of Contents
