Test Operation
1.2.6.3
Checks after Test Run
Perform the following checks after the test run is complete.
• Record the contents of field setting.
• Record the installation date.
NOTE:
After the test run, when handing the unit over to the customer, make sure the EL.COMPO.BOX
lid, the inspection door, and the unit casing are all attached.
158
→
Record them on the accessory "REQUEST FOR THE INDICATION" label.
And attach the label on the back side of the front panel.
→
Record the installation date on the accessory "REQUEST FOR THE INDICATION" label in
accordance with the IEC60335-2-40.
And attach the label on the back side of the front panel.
Si34-601A
Test Operation