Table of Contents
Advertisement
❷
❽
2. Installing the pedal sensor
❶
1. Be sure to install the machine head
support rod supplied with the unit.
2. If a pair of scissors or the like is
caught between the control box and
the table, the control box cover can
break. To prevent such an accident, do
not place anything on C section.
3. Be aware that the control box break-
age and/or oil leakage can occur if
operating the sewing machine with the
machine head support rod removed.
1) Install the pedal sensor to the table with mounting
screws ❶ supplied with the unit.
It is necessary to install the pedal sensor at such
a position that the connecting rod is perpendicu-
lar to the table.
2) After the completion of installation of the pedal
sensor on the table, place the sewing machine
head on the table.
– 4 –
Advertisement
Table of Contents
