Table of Contents
Advertisement
No.
Item
33
Thread trimming
function by reverse feed
stitching on the way
*
35
Sewing speed at a low
speed
*
36
Sewing speed of thread
trimming
37
Sewing speed of soft-
start
38
Sewing speed of one-
shot stitching
*
39
Operation-start pedal
stroke
*
40
Low speed section of
pedal
*
41
Starting position of lifting
presser foot by pedal
*
42
Starting position of
lowering presser foot
*
43
Pedal stroke 2 for start-
ing thread trimming
*
44
Pedal stroke for
reaching the maximum
sewing speed
*
45
Corrected neutral posi-
tion of the pedal
47
Auto-lifter selecting
function
*
48
Pedal stroke 1 for start-
ing thread trimming
49
Lowering time of presser
foot
*
50
Pedal specification
51
Compensation of
solenoid-on timing of
reverse feed stitching at
the start of sewing
52
Compensation of
solenoid-off timing of
reverse feed stitching at
the start of sewing
53
Compensation of
solenoid-off timing of
reverse feed stitching at
the end of sewing
55
Foot lift after thread
trimming
56
Reverse revolution to lift
the needle after thread
trimming
58
Function of holding
predetermined upper/
lower position of the
needle bar
59
Function of Auto/Manual
change-over of reverse
feed stitching at the start
of sewing
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineer's Manual and follow the instructions.
Description
Thread trimming function by reverse feed stitching on the way
0 : Automatic thread trimming function after completion of reverse feed
stitching on the way is not operative.
1 : Automatic thread trimming after completion of reverse feed stitching
on the way is performed.
Lowest speed by pedal (The MAX value differs by machine head.)
Thread trimming speed (The MAX value differs by machine head.)
Sewing speed at the start of sewing (soft-start) (The MAX value differs by
machine head.)
Sewing speed of one-shot stitching (The MAX value differs by machine
head.)
The pedal position at which the sewing machine starts operation from the
neutral position of the pedal (Pedal stroke)
Position where the sewing machine starts accelerating from pedal neutral
position (Pedal stroke)
Position where the cloth presser starts lifting from pedal neutral position
(Pedal stroke)
Starting position of lowering presser foot
Stroke from the neutral position
Position 2 where the thread trimming starts from pedal neutral position
(When the function of lifting presser foot by pedal is provided.) (Pedal
stroke)
Position where the sewing machine reaches its highest sewing speed
from pedal neutral position (Pedal stroke)
The neutral position of the pedal sensor is set.
Limitation time of waiting for lifting solenoid type auto-lifter device
Position where thread trimming starts from pedal neutral position (Stan-
dard pedal) (Pedal stroke)
Sets the time required until the lowering of the presser foot is completed
after a depress on the pedal.
Type of pedal is selected.
0 : Presser foot is not operated by the pedal (KFL)
1 : Presser foot is operated by the pedal (PFL)
Compensation of starting the solenoid for reverse feed stitching when
reverse feed stitching at the start of sewing is performed.
Compensation of releasing the solenoid for reverse feed stitching when
reverse feed stitching at the start of sewing is performed.
Compensation of releasing the solenoid for reverse feed stitching when
reverse feed stitching at the end of sewing is performed.
Function of lifting presser foot at the time of (after) thread trimming
0 : Not provided with the function of automatic lifting of work-clamp after
thread trimming
1 : Provided with the function of lifting presser foot automatically after
thread trimming
Function of reverse revolution to lift the needle at the time of (after)
thread trimming
0 : Not provided with the function of reverse revolution to lift the needle
after thread trimming
1 : Provided with the function of reverse revolution to lift the needle after
thread trimming
Function of holding predetermined upper/lower position of the needle bar
0 : Not provided with the function of holding predetermined upper/lower
position of the needle bar
1 : Provided with the function of holding predetermined upper/lower
position of the needle bar (Holding force is weak.)
2 : Provided with the function of holding predetermined upper/lower
position of the needle bar (Holding force is medium.)
3 : Provided with the function of holding predetermined upper/lower
position of the needle bar (Holding force is strong.)
This function can specify the sewing speed of reverse feed stitching at
the start of sewing.
0 : The speed will depend on the manual operation by pedal, etc.
1 : The speed will depend on the specified reverse feed stitching speed
(No. 8).
– 37 –
Setting range
Default
page
0/1
0
150 to MAX
2 0 0
(sti/min)
100 to MAX
2 0 0
(sti/min)
100 to MAX
8 0 0
(sti/min)
150 to MAX
2 0 0 0
(sti/min)
10 to 50
3 0
(0.1 mm)
10 to 100
6 0
(0.1 mm)
– 60 to –10
- 2 1
(0.1mm)
8 to 50
1 0
(0.1 mm)
– 60 to –10
- 5 1
(0.1 mm)
10 to 150
1 5 0
(0.1 mm)
–15 to 15
0
(0.1 mm)
10 to 600
6 0
(second)
– 60 to – 10
- 3 5
(0.1 mm)
0 to 500
1 4 0
(10 ms)
0/1
1
The setting
– 36 to 36
differs with the
(10°)
machine head.
The setting
– 36 to 36
differs with the
(10°)
machine head.
The setting
– 36 to 36
differs with the
(10°)
machine head.
0/1
1
0/1
0
0 to 3
0
0/1
1
Ref.
44
40
45
45
47
51
46
46
46
47
47
47
47
Advertisement
Table of Contents
