JUKI DLM-5200N Specifications

DLM-5200N
1-needle, Lockstitch Machine with Edge Trimmer
Beautifully finished lockstitched seams.
The thread take-up, feed mechanism, and thread path have been
improved so as to respond to material changes.
A consistent, beautiful seam finish is therefore attained.
The knife is so sharp that it can cut any
type of material.
The knife is designed so that the angle can be changed as
desired, allowing the knife to be easily applied to any type of
material.
During operation, the type of stitching
can be easily changed between lockstitch
alone and lockstitch with knife.
The knife can be attache by simply pressing the presser plate
on the machine arm. The knife is removed also by the simple
operation of the knob. Thus the type of stitching, such as with
or without knife, can be changed with ease.
The highly efficient lockstitch machine which
The highly efficient lockstitch machine which
assures the consistent quality of finished
assures the consistent quality of finished
seams comes with a sharp knife capable of
seams comes with a sharp knife capable of
cutting various types of material.
cutting various types of material.
The maximum stitch length for the DLM-
5200N has been increased to 5mm.
The stitch length can be adjusted using the dial.
The exclusive arm-shaped machine head
makes the material easier to handle.
The arm shape of the machine head has been adopted to
enhance ease of operation.
The operating noise and vibration of this
model are far less than its predecessors.
The operating environment has been greatly improved to allow
the operator to work comfortably with this machine.
This model is designed as the optimum
for high-speed sewing.
This model is made of special alloy steel, and a feed mechanism
and system have been incorporated to make the machine the
optimum for high-speed operation. As a result, this model
demonstrates a consistent sewing performance during high-speed
operation.
DLM-5200ND