Asko PEL D80 HP User Manual page 40

Failure display
In case of a failure while a program is in progress, the relevant Error X is indicated on the display unit.
Errors indicated on the display unit (depending on the model) may include the following:
Problem/error Error indication on the display
E0 Control unit failure.
E1 Thermistor error.
E2 Communication error.
E3 Pump error.
E6 Relay failure.
E7 Door failure.
E8 Button failure.
E9 PB/UI software versions are not com-
patible.
E10 EADBS communication error.
E11 Motor communication error.
40
Press and hold the INFO button to display the
error description.
Switch off the dryer and turn it back on.
What to do?
Control unit failure.
Call service centre.
Temperature sensor failure.
Call service centre.
Communication error.
Call service centre.
Failure on the pump for pumping the
condensate into the condensate tank
Call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Control unit failure.
Call service centre.
Call service centre.
Call service centre.
Call service centre.