Table of Contents
Advertisement
Delay Start
In the submenu of the selected program, you can set the start delay when you want the drying program
to start after a certain time (from 1 hour to 100 hours, from the time you press the Start / Pause button).
The estimated time until the end of drying will be displayed.
Use the program selector knob to set from 1 h to 100 hours in 1-hour steps.
Press the button under the selected time/duration to confirm the setting.
Press the Startbutton to start. When the countdown reaches zero, the selected drying program will
start automatically.
To cancel the start delay, press the button Cancel.
Then press the Start button to start the program.
During the countdown to the delayed start, the display will switch off after 5 minutes.
Use the program selector knob or press any button, to reactivate it. The countdown to the start of the
drying cycle will be displayed.
Display will switch on 1 minute before the start of the drying cycle.
After the countdown, drying time will be indicated on the display unit.
28
Advertisement
Table of Contents
