Asko PEL D80 HP User Manual page 36

Table continued from last page
36
3
Use the handle to pull out the heat pump filter.
4
Pull the foam part of the heat pump filter from
the housing. Wash it under running water and dry
it before replacing it in the filter housing.
The filter may be washed in the washing machine,
with the rinse program on low spin speed. Dry
the filter before replacing it in the filter housing.
INFORMATION!
Clean the foam filter at least after every 30
drying cycles or if necessary.
5
Use a soft dry cloth to also clean the heat pump
filter housing and net.
INFORMATION!
Lower part of the hosing contains a strainer
which shall be cleaned thoroughly.
INFORMATION!
Clean the heat pump filter housing and net
after every 30 drying cycles or if necessary.
With automatic heat pump net filter cleaning (only
available in some models), a few drops of water
may drip on the floor after the filter is removed;
therefore, lay a cloth on the floor.
6
The dust and dirt in the metal fins of the heat ex-
changer can be cleaned with a vacuum cleaner
and a soft brush attachment.
Without pressing, gently move the brush attach-
ment only in the direction of the metal fins from
top to bottom. Too much pressure can damage
or bend the metal fins of the heat exchanger.
We recommend you clean the heat exchanger at
least every twelve months.
7
Reassemble the foam filter and the filter housing.