Table of Contents
Advertisement
Table continued from last page
INFORMATION!
The heat pump filter has to be correctly placed into its slot. Otherwise, the heat exchanger
installed inside the dryer may be clogged.
Cleaning the appliance exterior
Clean the appliance exterior and the display unit using a soft damp cotton cloth and water. Do not
use solvents or abrasive cleaners that could damage the appliance (please observe the
recommendations and warnings provided by the manufacturers of the cleaning agents).
Wipe all parts of the dryer with a soft cloth until dry.
INFORMATION!
Keep the area around the dryer clean and cool. Dust, heat, and humidity will extend the drying
time.
INFORMATION!
Always disconnect the dryer from the power mains before cleaning.
In the case of a 3 phase connection of the appliance, switch off the main socket switch.
8
Reinstall the inside cover and turn attachments
to the locked position.
Close the outer cover.
37
Advertisement
Table of Contents
