Asko PEL D80 HP User Manual page 17

How to stack a dryer onto the washing machine:
There is a cardboard box in the dryer drum, containing the vacuum feet and the tipping guard.
1
The tipping guard consists of two
metal parts (A + B).
Use two screws to attach the A part to
the back of the dryer.
2
Undo the screw on the back side of
the washing machine.
3
Use the screw to attach the tipping
guard (B part) to the back of the
washing machine.
4
Level the washing machine so that it
is stable.
1. Level the washing machine in lon-
gitudinal and traverse direction by
rotating the adjustable feet using
a No. 32 spanner. The feet allow
levelling by +/- 1 cm.
2. After adjusting the height of the
feet, firmly tighten the jam nuts
(counter nuts) using a spanner No
17, by turning them towards the
bottom of the washing machine
3. Tighten the jam nuts (counter nuts).
.
17