ParaBody 440 GYM SYSTEM User Manual page 13

FIGURE 13
STEP 13
• Route the threaded end of LAT CABLE (92) through the TOP BOOM (7) as shown in FIGURE 13.
• Loosely assemble four 3-1/2" PULLEYS (79) to the slots in TOP BOOM (7) using four 3/8 X 2-3/4" BOLTS (38), eight 3/8"
FLANGE SPACERS (66), and four 3/8" LOCKNUTS (48) as shown in FIGURE 13. (NOTE: Make sure the cable is routed
under all the pulleys.)
STEP 14
• Snap two WEIGHT PLATE BUSHINGS (96) each,
into the " top" side of fifteen WEIGHT PLATES
(74) as shown in FIGURE 14.
• Slide the WEIGHT PLATE SHAFT (80) thru the
hole in the HEAD PLATE(81), and lock in place
using one E-RING (46) as shown in FIGURE 14.
7
66
48
FIGURE 14
13
• All FLANGE SPACERS & LOCKNUTS
are 3/8" FLANGE SPACERS (66) & 3/8"
LOCKNUTS (48).
79 38 3/8 X 2-3/4"
92
81
96
74
46
80