Frymaster MJ45 Installation, Operation And Maintenance Manual page 15

with the requirements of SANS 10087-1for use with LPG, SANS 827 for use with NG and any fire
department regulations and/or local bylaws applicable to the area. If in doubt, check with the
relevant authority before undertaking the installation. Upon completion of the installation you are
required to fully explain and demonstrate to the user the operational details and safety practices
applicable to the appliance and the installation.
FCC COMPLIANCE
The user is cautioned that any changes or modifications to Frymaster computers not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment. Frymaster computers
have been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
rules. While these devices are verified as Class A devices, they have been shown to meet the Class B limits.
These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of the equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at the user's expense.
If necessary, the user should consult the dealer or an experienced radio and television technician for
additional suggestions.
The user may find the booklet "How to Identify and Resolve Radio-TV Interference Problems"
helpful. It is prepared by the Federal Communications Commission and is available from the U.S.
Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4.
2.2 Dimensions
15.62
(397)
6.00
(152)
CORDSET
46.86
(1190)
31.24
(794)
2-4
The 45 in a single cabinet is
available with an optional lower
rear gas connection, which
accommodates installations closer
45
to the wall. The gas assembly, 108‐
5651, is available with an NPT‐to‐
INCHES
(MM)
BSP adapter, 813‐0540.
31.55
(801)
36.50
(927)
35.75
(908)
6.10
(155)
49.12
(1248)
3.00
47.67
57.82
(76)
(1211)
(1469)
46.00
(1168)
12.83
(326)
8.40
(213)
Gas Connection