Sequence Setup; Searching Recorded Video; Searching By Time - Speco DVR-4TL/160 User Manual

User's Manual
4.2

Sequence Setup

This section introduce you how to view in sequence mode Main Monitor and
Call Monitor, if connected. Sequence function can avoid manually
backtracking and give more flexibility while surveillance.
Select certain view format and press SEQ to toggle the automatic sequential
sequence, press ESC to stop sequencing.
4.3

Searching Recorded Video

The DVR-4TL series is capable of searching and playing back recorded
video by date and time or events. Entering the specific date and time of the
wanted video, the unit will then search for the matched video and play it on
the monitor. Alternatively, user can search event video by selecting channel
as well.
In live or playback mode, press SEARCH to enter the Search menu, which is
shown as follows.
4.3.1

Searching by Time

Follow the steps to search video by date and time.
• Press SEARCH key to enter the Search menu; the From Time and End
Time of the available video is listed on top of the screen. The value is
unchangeable.
• Use Direction keys to move the cursor for setting the Start Time; adjusting
the date and time values by UP / DOWN keys.
• Press ENTER to confirm the settings or ESC to abort.
• Move the cursor to <Begin Playback> and press ENTER to start playing
back the selected video.
Search
----------Search By Time----------
From: 2005/01/01 00:00:00
End: 2005/05/01 00:00:00
Start Time: 2005/01/01 00:00:00
----------Search By Event----------
Select Channel: CH1 CH2 CH3 CH4
24
Begin Playback
Event List