User's Manual
4.6.2
Dome Protocol Setup
The Dome Protocol item lists the available dome protocols for communicating
with dome cameras connected to the DVR-4TL series. From the Main menu,
select <Camera Setup> and press ENTER. The following menu is displayed.
1. Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
To configure dome protocol, select a camera first and set the communications
protocol associated with dome camera using the Direction keys and ENTER.
The available protocol includes <DynaColor>, <Pelco D>, <Pelco P>,
<AD422>, <Fastrax 2> and <None> (default).
4.6.3
RS485 Setup
DVR-4TL series controls the domes via RS-485 communication protocol. The
RS-485 parameters in DVR-4TL series must be set to the same parameters
as the protocol for RS-422 setup of the dome.
Users are allowed to change the RS-485 settings of the DVR-4TL series.
Select <System Setup> in Main menu, then select <RS485 Setup> from the
System Setup menu and press ENTER. The following menu is displayed.
1 Unit ID
2 Baud Rate
3 Bits
4 Stop
5 Parity
Camera Setup
NOTE: The settings become effective after saving the changes and
exiting from the menu.
RS485 Setup
30
CH1
None
0
NO
NO
0
0
0
0
224
9600
8
1
None