Entering Osd Setup Menu - Speco DVR-4TL/160 User Manual

User's Manual
3.3

Entering OSD Setup Menu

The OSD Main menu contains a list of items that are used to configure the
DVR-4TL series. To enter the Main menu, press MENU and then enter
Administrator or User password. The Password Verification screen displays
as follows.
The default passwords are shown in the following table. The same passwords
are used for entering the remote viewing software specoRemote Lite.
Administrator Password
After entering the correct password, the Main menu is displayed.
1. System Setup
2. Monitor Setup
3. Camera Setup
4. Record Setup
5. Sequence Setup
6. Event Setup
7. Database Setup
8. Configuration
9. Shutdown
Move the cursor up / down over the OSD items using the Direction keys and
press ENTER to enter the selected sub-menu.
Password Verification
________
Press Channel Keys To Enter Password
(4-8 Digits)
Press ◄ Key To Delete
1 2 3 4
NOTE: It is strongly suggested to change the passwords to prevent
unauthorized access to the unit.
Main Menu
16
User Password
4 3 2 1