Advertisement
5.
Loosen the seat slider
tension lever, then tip bike
backwards.
Note: Use a blanket or
foam casing from the box
to tilt the bike onto to avoid
damage.
6.
Use a 13mm open-ended
wrench to secure the front
stabilizer 740-9537-XX
to the frame with 2 M8 x
18mm flange bolts 110-
4332.
7.
Use a torque wrench with
a 13mm allen socket to
torque the flange bolts to
37 ft-lb (50 N-m).
8.
Return the bike to standing.
9.
Loosen the seat slider
tension lever, then slide the
seat assembly onto the seat
post.
Page 12
Fig. 6
727-0278
727-0279
Fig. 7
740-9537-XX
110-4332
37 ft-lb
(50 N-m)
Advertisement
