WARNING - to reduce the risk of injury to limit of: person: • 4-UB - 450 lbs. / 204 kg. The safety and integrity of this machine can only 24 in (0.6 m) be maintained when the equipment is regularly examined for damage and wear and repaired.
ASSEMBLY Assembly instructions cover either 10” touchscreen or LCD console. For 15” Embedded, please see the console manual 620-8816 for additional wiring and configuration information. Required Tools: • Metric Socket Set • Metric Allen Key Set • Torque Wrench • #2 Phillips Screwdriver •...
Page 8
5. Use a 4mm allen key to secure the M8 x 40mm set screw (740-4593) into the mast. Fig. 8 6. Loosen the seat pop pin and pull outwards then insert the seat post assembly (718-6016) into the frame. 7. With the seat post sleeve flush into the frame, use a #2 phillips screwdriver to install two (2) pieces of the M4 x 16mm pan head screw (110-3164) to secure...
Page 9
9. Unpack the console, console mounting screws, and console install wiring instructions (620-8657) from the console box. 10. Set the lower rear panel (020-7958) into place on the mast, then install the back console shroud (701-0344-XX). Fig. 11 11. Use a #2 phillips screwdriver and attach the back shroud of the console to the console mount using eight (8) pieces each of the of the #8-18 x 3/4”...
Page 10
(Green/White) (Red/Black) Fig. 14 Wiring from Neck of Unit 13. Plug the three cables from Fig. 15 into the console as indicated in Fig. 16. Note: Lines E & F indicate the wiring path from the board to the rear console jacks.
15. Once the bike is fully assembled and is in it’s final position, adjust the rear leveling feet to ensure the bike is level and stable, then use a 19mm open- ended wrench to tighten the two (2) 1/2” nuts to lock the feet. Fig.
Use the arrow keys to highlight MODEL then press Use the arrow keys to highlight 4-BIKE then press confirm the selection. Fig. 20 10” TOUCHSCREEN CONSOLE Touch the top left corner, then the center and then the top left corner again. The Service Menu will display.
SUPPORT & SERVICE For Technical Support, Service, Parts Orders or any Customer Service needs, please contact us direct by phone, email, or through our 24 hour support site: GLOBAL SUPPORT CENTER 4400 NE 77th Avenue, Suite 300 Vancouver, WA 98662 Tel: (360) 326-4090 •...
Page 16
PART NUMBER 620-8733, REV B All rights reserved. Star Trac, the Star Trac logo and StairMaster are registered trademarks of Core Health & Fitness, LLC. Schwinn and Nautilus are registered trademarks of Nautilus Inc. used under license to Core Health & Fitness LLC. Throwdown is a registered trademark of Throwdown Industries, LLC.