Removing The Cowl; Lubrication; Greasing The Machine - Toro Ultra Buggy 2500 Operator's Manual

Lifting the Machine (continued)
2. Lift the machine using the side or rear pockets.

Removing the Cowl

1. Place the hopper in the dump position.
2. Shut off the engine and allow the engine to cool.
3. Unhook the cowl latches and remove the cowl.
4. When finished, install the cowl and secure the latches.

Lubrication

Greasing the Machine

Grease Type: General-purpose grease.
Note:
Remove the blue protection caps, if applicable, before greasing and replace when
finished.
1. Park the machine on a level surface and engage the parking brake.
2. Shut off the engine and allow the engine to cool.
3. Clean the grease fittings with a rag.
3461-467A
g358688s
g358757s
Page 5–4 Maintenance: Pre-Maintenance Procedures