Operating The Hopper - Toro Ultra Buggy 2500 Operator's Manual

Operator Platform (continued)
• Driving down slopes
Lowering the Platform
1. Push the platform against the cushion to
release pressure on the latch pin.
2. Pull the latch pin out and lower the platform.
Raising the Platform
1. Pull out the latch pin and raise the platform.
2. Release the latch pin to lock the platform in
place.

Operating the Hopper

The machine is normally operated on uneven, unpaved, bumpy, and/or inclined surfaces.
Know the load capacities of your machine and adjust your load accordingly.
Operation: During Operation
G384422s
G384423s
Page 4–8 3461-467 A