Removing The Outer Wheels - Toro Ultra Buggy 2500 Operator's Manual

Removing the Outer Wheels

You can reduce the width of the machine from 117 cm (46 inch) to 91 cm (36 inch), using a
wood block and a crow bar.
The maximum payload is reduced to 850 kg (1875 lb) when operating the machine
without the dual wheels.
1. Drive the machine onto a wood block so only
the inner wheel is on top of the block with the
outer wheel unsupported; engage the parking
brake.
2. Remove the large T-bolt in the center of the
wheel with a crow bar.
3. Remove the outside wheel hub with the quick-
change hub attached.
4. Repeat the above steps on other side of the
machine.
3461-467A
IMPORTANT
G358041s
Page 4–13 Operation: After Operation