Operating The Hopper - Toro MB-1600 Operator's Manual

Operator Platform (continued)
Lowering the Platform
1. Push the platform against the cushion to
release pressure on the latch pin.
2. Pull the latch pin out and lower the platform.
Raising the Platform
1. Pull out the latch pin and raise the platform.
2. Release the latch pin to lock the platform in
place.

Operating the Hopper

The machine is normally operated on uneven, unpaved, bumpy, and/or inclined surfaces.
Know the load capacities of your machine and adjust your load accordingly.
1. Position the machine in the area where you intend to dump the load.
Operation: During Operation
G384422
G384423
Page 4–9 3451-702 A