Technical Data; Characteristics; Weights; Allowed Mattress Sizes - Invacare SB 755 User Manual

9 Technical Data

9.1

Characteristics

Automatic Operation
Max. angle in Manual mode
Max. angle in Automatic mode primary wing = 40°
Angle values in Automatic
mode
Time values in Automatic
mode
9.2

Weights

Max. user weight
(provided that the weight of the mattress
does not exceed 20 kg)
Max. safe working load weight (including
mattress)
Weights of Soft Tilt components
Complete (main module and 4 arms)
Head arm (1 piece)
Foot arm (1 piece)
Main module
Control Box
9.3

Allowed mattress sizes

Mattress height and side rail compatibility
IMPORTANT!
Depending if the end-user in a side position is laying
on a flat wing (mattress horizontal) OR if the wing
the end-user is laying on is raised up to 12°, different
combinations of mattresses and side rails are required
(see appropriate chart below).
- End-user laying on flat wing
Allowed mattress heights, when the end-user is laying on a flat
wing (secondary wing = 0°).
Side rail
Britt V / Line / Line Extendable
Britt V / Line / Line Extendable with
side rail height extender mounted*
Scala Medium 2
Scala Decubi 2
Verso ||
Scala Basic 2 / Scala Basic Plus 2
*Must be dismounted when the side rail is collapsed and the
end-user is getting out of the bed.
21
yes
80°
secondary wing = 12°
0°–40° (+/- 1° interval)
0, 3, 10–180 min (+/- 10 min
intervals)
165 kg
185 kg
31 kg
3.8 kg
2.6 kg
18.2 kg
2.5 kg
Mattress height
10–14 cm
10–29 cm
10–16 cm
17–25 cm
10-14 cm
10-11 cm
– End-user laying on a elevated wing
Allowed mattress heights, when the end-user is laying on a up to
12° elevated wing (secondary wing = 1–12°).
Side rail
Britt V / Line / Line Extendable with
side rail height extender mounted*
Scala Decubi 2
Scala Medium 2
*Must be dismounted when the side rail is collapsed and the
end-user is getting out of the bed.
Mattress width and length depending on bed
width
Bed width Allowed mattress width
85 cm 83–85 cm
90 cm 88–90 cm
A castellated mattress is recommended.
9.4

Environmental conditions

Temperature
Relative humidity
Atmospheric pressure
Be aware that when a bed has been stored under
low temperatures, it must be adjusted to operating
conditions before use.
9.5

Electrical system

Voltage supply: Uin 230 Voltage, AC, 50/60 Hz (AC = Alternating
current)
Maximum current input: Iin max.1,5 Ampere
Intermittent (periodic motor operation): Int = Max. 10 %, 2 min
ON / 18 min OFF
Insulation class: CLASS II
Type B Applied Part
Applied Part complying with the specified requirements for pro-
tection against electrical shock according to IEC60601-1.
(An applied parts is a part of the medical equipment which is
designed to come into physical contact with the patient or parts
that are likely to be brought into contact with the patient.)
Technical Data
Matteress height
10–24 cm
17–19 cm
10 cm
Min. length
200 cm
200 cm
Storage and Operation
transportation
-10°C to +50°C +5°C to +40°C
20% to 75%
800 hPa to 1060 hPa
IVCMA755221119