Table of Contents
Advertisement
SERVICE WORK ON THE CHASSIS 11
–
Inject the liquid into the system only until it emerges from drill
5
hole
of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
E00562-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
4 mm (0.16 in)
71
Advertisement
Table of Contents
