National Instruments NI PXI-8104 User Manual page 60

Note
For the standards applied to assess the EMC of this product, refer to the Online
Product Certification section.
Note For EMC compliance, operate this device with shielded cabling.
CE Compliance
Online Product Certification
Environmental Management
EU Customers
center. For more information about WEEE recycling centers and National Instruments
WEEE initiatives, visit
National Instruments
(For information about China RoHS compliance, go to
© National Instruments Corporation
This product meets the essential requirements of applicable European
Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and
the DoC for this product, visit
number or product line, and click the appropriate link in the Certification
column.
National Instruments is committed to designing and manufacturing
products in an environmentally responsible manner. NI recognizes that
eliminating certain hazardous substances from our products is beneficial
not only to the environment but also to NI customers.
For additional environmental information, refer to the NI and the
Environment Web page at
environmental regulations and directives with which NI complies, as well
as other environmental information not included in this document.
Waste Electrical and Electronic Equipment (WEEE)
At the end of their life cycle, all products must be sent to a WEEE recycling
ni.com/environment/weee.htm
National Instruments
RoHS
ni.com/certification
ni.com/environment
ni.com/environment/rohs_china
ni.com/environment/rohs_china
A-5
Appendix A Specifications
, search by model
. This page contains the
.
(RoHS)
NI PXI-8104 User Manual
.)