Table of Contents
Advertisement
Common Configuration
Questions
General Questions
Boot Options
© National Instruments Corporation
This chapter answers common configuration questions you may have when
using the NI PXI-8104 embedded controller.
What do the LEDs on the NI PXI-8104 front panel mean?
Refer to the LED status descriptions in the
Chapter 3,
I/O
Information.
How do I check the configuration of the memory, hard drive,
time/date, and so on?
You can view these parameters in the BIOS setup. To enter the BIOS setup,
reboot the NI PXI-8104 and press <Delete> during the memory tests. Refer
to the
Entering BIOS Setup
Configuration, for more information.
Can I use the internal hard drive and an external hard drive at the
same time?
Yes.
What devices can I boot from?
The NI PXI-8104 can boot from the following devices:
•
The internal hard drive
•
An external SCSI hard drive or CD-ROM if an SCSI adapter, such
as the PXI-8214, is used
•
A network PXE server on the same subnet
Front Panel Features
section of Chapter 2,
4-1
4
section of
Installation and
NI PXI-8104 User Manual
Advertisement
Table of Contents
