NETGEAR GS728TPv3 Hardware Installation Manual page 7

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
about the smart CLI, see the CLI manual. To find the CLI manual, visit
netgear.com/support/download/ and enter your model number in the search box.
• NETGEAR Insight Cloud Portal and Insight app: If you set the management mode
of the switch to NETGEAR Insight Mobile App and Insight Cloud Portal, you can use
the following applications to manage the switch remotely:
- Insight Cloud Portal: As an Insight Premium or Insight Pro user, you can use the
Insight Cloud Portal to set up the switch in the network; perform remote setup;
configure, manage, and monitor the switch; analyze the switch and network
usage; and, if necessary, troubleshoot the switch and the network.
- Insight app: With the Insight app, you can discover the switch on the network
and add it to a network location. You can then set up the switch in the network,
and manage and monitor the switch remotely from your tablet or smartphone.
You can choose from four methods to add the switch to the Insight app: You can
scan your network for the switch, scan the QR code of the switch, scan the barcode
of the switch, or add the serial number of the switch.
For more information about NETGEAR Insight, visit netgear.com/insight. The Insight
Cloud Portal and Insight app have embedded help and are documented in multiple
knowledge base articles that you can access by visiting netgear.com/support.
By default, the management mode is set to Directly Connect to Web Browser Interface
(which is the same as the device UI). Note the following about changing the
management mode:
- Changing to NETGEAR Insight Mobile App and Insight Cloud Portal mode.
The first time that you change to this mode, the switch is set to factory default
settings so that you can manage the switch using the Insight Cloud Portal or
Insight app. However, if you previously added the switch to a network on Insight,
all Insight-manageable device settings revert to the configuration in the Insight
cloud, including the switch password (that is, the password is reset to the Insight
network password).
Note: If you use the Insight app or the Insight Cloud Portal, you can temporarily
change the management mode of the switch back to Directly Connect to Web
Browser Interface and access the device UI for settings that are not
Insight-manageable. You might want to do this for tasks such as integrating with
an existing network of devices that are not managed through Insight, and for
debugging purposes. When you are done, you can change the management
mode back to NETGEAR Insight Mobile App and Insight Cloud Portal.
- Changing back to Directly Connect to Web Browser Interface mode: The
NETGEAR Insight Mobile App and Insight Cloud Portal management mode is
disabled and the current Insight-manageable device settings are saved to the
Introduction 7 Hardware Installation Guide