NETGEAR GS728TPv3 Hardware Installation Manual page 10

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Ethernet surge protector inline between the indoor product and the outdoor
device. Failure to do so can damage the product.
WARNING:
https://kb.netgear.com/000057103 for additional safety and warranty information.
Failure to follow these guidelines can result in damage to your NETGEAR product,
which might not be covered by NETGEAR's warranty, to the extent permissible by
applicable law.
• Observe and follow service markings:
- Do not service any product except as explained in your product documentation.
Some devices should never be opened.
- If applicable to your product, opening or removing covers that are marked with
the triangular symbol with a lightning bolt can expose you to electrical shock.
We recommend that only a trained technician services components inside these
compartments.
• If any of the following conditions occur, unplug the product from the power outlet,
and then replace the part or contact your trained service provider:
- Depending on your product, the power adapter, power adapter cable, power
cable, extension cable, or plug is damaged.
- An object fell into the product.
- The product was exposed to water.
- The product was dropped or damaged.
- The product does not operate correctly when you follow the operating
instructions.
• Keep the product away from radiators and heat sources. Also, do not block cooling
vents.
• Do not spill food or liquids on your product components, and never operate the
product in a wet environment. If the product gets wet, see the appropriate section
in your troubleshooting guide, or contact your trained service provider.
• Do not push any objects into the openings of your product. Doing so can cause fire
or electric shock by shorting out interior components.
• Use the product only with approved equipment.
• If applicable to your product, allow the product to cool before removing covers or
touching internal components.
Introduction
Before connecting the product to outdoor cables or devices, see
10 Hardware Installation Guide