NETGEAR GS728TPv3 Hardware Installation Manual page 15

24-Port and 48-Port Gigabit Ethernet PoE+ Smart Switches with 4 SFP Ports
Table 1. Front panel
Number Description
1 Power LED
2 Fan LED
3 PoE Max LED
4 LED Mode LEDs
5 Reset button.
For more information, see Single-function Reset button on page 18.
6 LED Mode button.
This button lets you change the information that the port LEDs provide, which is either switching
information (link, speed, and activity) or PoE information (PoE-powered and PoE fault).
For more information, see LEDs on page 16.
7 Factory Defaults button.
For more information, see Dual-function Factory Defaults button on page 19.
8 USB 2.0 port for firmware updates, configuration backups, and memory dumps.
For more information, see USB port on page 19.
9 24 or 48 LEDs associated with the Ethernet ports.
Depending on the position of the LED Mode button, the LEDs provide either switching information or
PoE information.
For more information, see LEDs on page 16.
10 4 LEDs associated with the 4 SFP ports.
For each port, the associated LED functions as the combined link and activity LED.
For more information, see LEDs on page 16.
11 24 or 48 independent 10/100/1000BASE-T RJ-45 PoE ports.
For more information, see RJ-45 ports for 10/100/1000M BASE-T Ethernet connectivity on page 17.
12 4 dedicated SFP ports in which you can install GBICs for fiber or copper connections.
For more information, see SFP ports for fiber or copper connectivity on page 18.
Hardware Overview
For more information, see LEDs on page 16.
15 Hardware Installation Guide