Table of Contents
Advertisement
30
•
The PST V3.2 software must be selected (checkmark set). Then click on <Next>.
Fig. 22: WLAN Client, PST Tool, start of installation
ARCADIS
Installation of the PST Tool is started. Here, several Installation windows are dis-
played temporarily.
If a "Choose Destination Location" request is displayed, leave the default installa-
tion directory and click on the <Next> button.
Close any additional requests or message windows by clicking on the <OK> but-
ton.
After successful installation, the text "Setup has successfully installed and config-
ured the software on your computer." appears.
DRAFT 22.04.2008
SP00-000.814.09.01.02
11.07
WLAN Configuration
Page 30 of 78
CS PS SP
Siemens
Medical Solutions
Advertisement
Table of Contents
