Default Security Configuration - AMX NetLinx NXM-MHS Instruction Manual

Main Security Menu (Cont.)
Command
14) Reset Database
15) Display Database

Default Security Configuration

By default, the NetLinx master will create the following accounts, access rights, directory
associations, and security options.
Account 1:
Password:
Group:
Rights:
Directory Association: /*
Account 2:
Password:
Group:
Rights:
Directory Association: none
Group 1:
Rights:
Directory Association: /*
Security Options:
!
The "administrator" user account cannot be deleted or modified with the exception its
password. Only a user with "Change Admin Password Access" rights can change the
administrator password.
! The "NetLinx " user account is created to be compatible with previous NetLinx master
firmware versions.
! The "administrator" group account cannot be deleted or modified.
! The FTP Security and Admin Change Password Security are always enabled and cannot
be disabled.
NetLinx Master Cards and Modules
User Name: administrator
password
administrator
All
User Name: NetLinx
password
none
FTP Access
Group: administrator
All
FTP Security Enabled
Admin Change Password Security Enabled
All other options disabled
Get other manuals https://www.bkmanuals.com
Description
If a user has been given "administrator rights", this addi-
tional menu option is displayed. This selection will reset
the security database to its Default Security Configuration
settings, erasing all users and groups that were added.
This is a permanent change and you will be asked to ver-
ify this before the database is reset.
If a user has been given "administrator rights", this addi-
tional menu option is displayed. This selection will display
the current security settings to the terminal (excluding
user passwords).
NetLinx Security
37