Table of Contents
Advertisement
Edit User Menu
Command
1) Change User Password
2) Change Inherits From Group
3) Add Directory Association
4) Delete Directory Association This selection will display any current Directory Associations
5) List Directory Associations This selection will display any current Directory Associations
6) Change Access Rights
7) Display User Record Contents This selection will display the group the user is assigned to and the
Access Rights Menu
The Access Rights Menu is accessed whenever you select Change Access Rights from the Edit
User Menu, or Change Access Rights from the Edit Group Menu. The Access Rights Menu is
displayed as follows:
Select to change current access right
1) Terminal (RS232) Access................. Disabled
2) Admin Change Password Access............ Disabled
3) FTP Access.............................. Disabled
4) HTTP Access............................. Enabled
5) Telnet Access........................... Enabled
6) Security Configuration Access........... Enabled
Or <ENTER> to return to previous menu
Set Rights ->
The selection listed will display the current access rights. Each selection simply toggles the access
right selected. Press
The Access Rights Menu is described in the following table:
Access Rights Menu
Command
1) Terminal (RS232) Access
(Enable/Disable)
2) Admin Change Password Access
(Enable/Disable)
3) FTP Access
(Enable/Disable)
(Cont.)
NetLinx Master Cards and Modules
Description
This selection prompts you to enter the new password (twice) for the
user. Once the new password is entered, the user must use the new
password from that point forward.
This selection will display the current group the user is assigned to
(if any). It will then display a list of current groups and prompts you
to select the new group.
This selection will display any current Directory Associations
assigned to the user, and then will prompt you for a path for the new
Directory Association. Refer to Directory Associations on page 26
for details.
assigned to the user, and then will prompt you to select the Direc-
tory Association you want to delete.
assigned to the user.
This selection will display access the Access Rights Menu for the
user, which allows you to set the rights assigned to the user.
current Access Rights assigned to the user.
to exit the menu and return to the previous menu.
<ENTER>
Description
Enables/disables Terminal (RS232 Program port) Access. The
account has sufficient access rights to login to a Terminal session
if this option is enabled.
Enables/disables Administrator Change Password Access. The
account has sufficient access rights to change the administrator
password if this option is enabled.
Enables/disables FTP Access. The account has sufficient access
rights to access the NetLinx master's FTP Server if this option is
enabled.
Get other manuals https://www.bkmanuals.com
NetLinx Security
31
Advertisement
Table of Contents
