Table of Contents
Advertisement
NetLinx Security
Main Security Menu
The Main Security menu is described below:
Main Security Menu
Command
1) Set system security options for
NetLinx master
2) Display system security options for
NetLinx master
3) Add user
4) Edit user
5) Delete user
6) Show the list of authorized users
7) Add group
8) Edit group
9) Delete group
10) Show list of authorized groups
11) Set Telnet Timeout in seconds
12) Display Telnet Timeout in seconds
13) Make changes permanent by saving to
flash
(Cont.)
36
Description
This selection will bring up the Security Options Menu
that allows you to change the security options for the
NetLinx master (refer to the Security Options
Menu section on page 29 for details). These are "global"
options that enable rights given to users and groups. For
instance, if you want to disable Telnet security for all
users, you would simply go to this menu and disable Tel-
net security for the entire master. This would allow any
user, whether they have the rights to Telnet or not. These
options can be thought of as options to turn on security
for different features of the NetLinx master.
This selection will display the current security options for
the NetLinx master.
This selection will prompt you for a user name and pass-
word for a user you would like to create. After the user is
added, you will be taken to the Edit User Menu to setup
the new users rights (see the Edit User Menu section on
page 31 for details).
This selection will prompt you select a user. Once you
have selected the user you want to edit, it will take you to
the Edit User Menu so you can edit the user's rights (see
the Edit User Menu section on page 31 for details).
This selection will prompt you select a user to delete.
This selection displays a list of users.
This selection will prompt you for a group name fro a
group you would like to create. After the group is added,
you will be taken to the Edit Group Menu to setup the new
users right (see the Edit Group Menu section on page 32
for details).
This selection will prompt you select a group. Once you
have selected the group you want to edit, it will take you to
the Edit Group Menu so you can edit the group's rights
(see the Edit Group Menu section on page 32 for details).
This selection will prompt you select a group to delete. A
group can only be deleted if there are no users assigned
to that group.
This selection displays a list of groups.
This selection allows you to set the time a telnet session
waits for a user to login. When a Telnet client connects to
the NetLinx master, it is prompted for a user name. If the
client does not enter a users name for the length of time
set in this selection, the session will be closed by the
NetLinx master.
This selection allows you to display the time a telnet ses-
sion waits for a user to login.
When changes are made to the security settings of the
master, they are initially only changed in RAM and are not
automatically saved permanently into flash. This selection
saved the current security settings into flash. Also, if you
attempt to exit the Main Security Menu and the security
settings have changed but not made permanent, you will
be prompted to save the settings at that time.
Get other manuals https://www.bkmanuals.com
NetLinx Master Cards and Modules
Advertisement
Table of Contents
