Table of Contents
Advertisement
NXC-M Master Card
Specifications
NXC-M Master Card Specifications
Power Requirements
Memory
Front Panel Components:
Connector
LED indicators
Rear Panel Components
LED indicators
Connectors
Enclosure
Front Faceplate
Dimensions (HWD):
Card(s)
Module
Weight:
Card only
With module
Optional accessories
NetLinx Master Cards and Modules
260 mA @ 12 VDC
• Disk on chip (Non-volatile): 8 MB (upgradeable to 32 MB)
• SDRAM (Volatile): 16 MB
• NVS (Non-volatile): 1 MB
Program port - DB-9 (male) connector for system programming and diagnos-
tics
• Status - Green LED shows AXlink/NetLink data activity.
• Output - Red LED shows data output activity.
• Input - Yellow LED shows data input activity.
• AXlink - Green LED blinks to show AXlink data activity.
• ICSNet - Green LEDs that light when sending/receiving data.
• ICSHub IN/OUT - Yellow LEDs that light when sending/ receiving data.
• PWR - 2-pin (male) green captive-wire connector for 12 VDC power.
• AXlink - Black 4-pin (male) captive-wire connector that provides data and
power to external control devices.
Power rating = 6 A max; actual load depends on connected power supply.
• PROGRAM port - 5-pin (male) gray connector for system programming and
diagnostics.
• ICSNet - Two RJ-45 connectors that provide power and data to external
ICSNet devices.
Power rating = 500 mA.
• ICSHub IN/OUT - Two RJ-45 connectors that provide data to other Hubs
connected to the Master Card.
Metal with black matte finish.
Plastic gray with translucent viewing window.
0.5" x 4.8" x 8.5" (127 mm x 121.9 mm x 215.9 mm)
1.5" x 5.0" x 8.8" (45 mm x 127 mm x 224 mm)
11.2 oz (317.51 g)
12.8 oz (362.87 g)
• 12 VDC power supply (PSN 6.5, PSN 2.8)
• AC-RK Accessory Rack Kit (Module)
Get other manuals https://www.bkmanuals.com
NXC-M Master Card
7
Advertisement
Table of Contents
