NXC-MPE Master Port Expander Card
The NXC-MPE Master Port Expander Card shares the features and functionality of the NXC-ME,
but with an RJ-11 SPE (Server Port Expander) connector instead of a 4-pin AXlink connector. The
SPE port allows you to use the NXC-MPE in conjunction with an AXB-SPE (Server Port
Expander) to control up to 12 additional AXlink bus lines of up to 3,000 feet (914.4 meters) in
distance each.
Specifications
NXC-MPE Specifications
Power Requirements
Memory
LEDs:
AXlink (green)
ICSNet (green)
ICSHub IN/OUT (yellow) Lights when sending/receiving data
Connectors:
PWR
Ethernet 10/100
Expansion OUT
PROGRAM port
ICSNet
ICSHub IN/OUT
Enclosure
Front Faceplate
Dimensions (HWD):
Card(s)
Module
Weight:
Card only
With module
Optional accessories
NetLinx Master Cards and Modules
1.55 A @ 12 VDC
• Disk on chip (Non-volatile): 8 MB (upgradeable to 32 MB)
• SDRAM (Volatile): 16 MB
• NVS (Non-volatile): 1 MB
Lights to show AXlink data activity
Lights when sending/receiving data
2-pin (male) green captive-wire connector for 12 VDC power supply.
RJ-45 Ethernet 10/100 connector. The Ethernet Port automatically negotiates the
connection speed (10 Mbps or 100 Mbps) and whether to use half duplex or full
duplex mode.
RJ11 connector connects to an AXB-SPE Server Port Expander.
5-pin (male) gray connector for system programming and diagnostics.
Two RJ-45 connectors that provide power and data to external ICSNet devices.
• Power rating = 500 mA.
Two RJ-45 connectors that provide data to other Hubs connected to the Master
Card.
Metal with black matte finish.
Plastic gray with translucent viewing window.
0.5" x 4.8" x 8.5" (127 mm x 121.9 mm x 215.9 mm)
1.5" x 5.0" x 8.8" (45 mm x 127 mm x 224 mm)
11.2 oz (317.51 g)
12.8 oz (362.87 g)
• 12 VDC power supply (PSN 6.5, PSN 2.8)
• AC-RK Accessory Rack Kit (Module)
Get other manuals https://www.bkmanuals.com
NXC-MPE Master Port Expander Card
13