Smart Operation Mode; Sleep Function - Vivax ACP-12CH35REWI R32 User Manual

ENG

Smart operation mode

Under the cooling, heating and dehumidifying mode, press the SMART key
to enter the smart function. Under the smart running mode, when the air
conditioning is running, it will automatically select cooling, heating,
dehumidifying or blowing mode as When the smart function is running, press
the "cooling" "heating" or "dehumidifying" key to switch to the other mode,
you will exit from the smart function.
1. Press the ON/OFF button, the air-conditioner starts to operate.
2. Press the SMART button and
controller.
Note: Unit can work in different SMART modes:
SMART FRESH/ DEFROST/ FAN SPEED/ FAN HEALTH/ DRY/ SOFT/
CONTROL TEMPERATURE
Sleep Operation
Press SLEEP button and unit will operate in SLEEP mode.
Cool/ Dry mode:
One hour after you set SLEEP mode, temp. will become 1 ºC higher.
After one hour again for 1 ºC higher. The unit will run further for 6 hours and
then it stops.
Heat mode:
One hour after you set SLEEP mode, temp. will become 2 ºC lower then
temp. setting.
After one hour, again for 2 ºC lower.
After 3 hours, temp. will rise for 1 ºC.
Smart mode:
The unit operetes in corresponding sleep mode, which is adapted to the
automatically selected operation mode.
icon is displayed on the remote
27
-
VIVAX