Table of Contents
Advertisement
TRENDnet User's Guide
1.
Check the checkbox of Enable Motion Detection.
2.
Check the checkbox of Enable Dynamic Analysis for Motion if you want
to mark the detected objects with green rectangles.
© Copyright TRENDnet. All Rights Reserved.
3.
4.
5.
Steps:
1.
2.
Note: Select Disable for rules if you don't want the detected objected
displayed with the green rectangles. Select disable rules from
Configuration > Local Configuration > Live View Parameters‐rules.
Click Draw Area. Click and drag the mouse on the live video to draw a
motion detection area. Click Stop Drawing to finish drawing one area.
(Optional) Click Clear All to clear all of the areas.
(Optional) Move the slider to set the sensitivity of the detection.
Click Arming Schedule to edit the arming schedule.
Click on the time bar and drag the mouse to select the time period.
Note: Click on the selected time period, you can adjust the time
period to the desired time by either moving the time bar or input the
TV‐IP1328PI
33
Advertisement
Table of Contents
